Multi-family, mixed-use and retail properties across the five boroughs, Westchester and Long Island. Systems-level assessment with a written report in 24 hours.
Commercial and multi-family properties carry risk that a residential checklist does not reach. The inspection is scoped to the building's systems, its envelope, and the conditions that drive capital expense after closing.
Heating plant, domestic hot water, electrical service and distribution, and visible mechanical infrastructure. In multi-family buildings the question is rarely whether a system works today, but how much service life is left and what replacement costs.
Storefront envelope, means of egress observations, visible mechanical and electrical serving the space, and evidence of prior alteration. Tenant build-outs layer over each other in older NYC retail, and undocumented work is common.
Facade condition where visible, roof covering and drainage, foundation and cellar conditions, and water intrusion evidence. Envelope failure in a multi-unit building compounds quickly because one leak path reaches multiple units.
Commercial property in New York does not look the same from one borough to the next. The building stock, the era it was built in, and the way it has been altered all change what an inspection needs to look at.
Mixed-use along the avenues, where ground-floor retail sits under apartments and the two share structure, plumbing stacks and often a single heating plant. Converted industrial and loft space in Gowanus, Bushwick and Sunset Park brings heavy timber or steel framing, roofs at the end of long service lives, and tenant build-outs layered over each other.
Retail and mixed-use corridors along Roosevelt Avenue, Queens Boulevard and Jamaica Avenue, plus industrial and flex space in Long Island City, Maspeth and College Point. Small multi-tenant buildings here frequently carry undocumented alterations from successive tenants, and separating what is original from what was added is a large part of the work.
Pre-war apartment and mixed-use buildings along the Grand Concourse and the Fordham Road and 149th Street retail corridors, plus industrial property around Hunts Point. Heating plant and domestic hot water condition tend to dominate the capital picture in Bronx multi-family, because replacement cost is the single largest number in the file.
Ground-floor retail, loft and office buildings in SoHo, Tribeca and the Garment District, and pre-war elevator buildings throughout. Facade and envelope questions carry more weight here, and in a landmarked district or on a cast-iron facade, the approval process changes both the cost and the timeline of any repair the inspection turns up.
Standalone and strip retail, flex and light industrial, and small office property along corridors like Hylan Boulevard and through Nassau and Suffolk. Detached commercial construction brings roof drainage, parking-area grading, septic where there is no municipal sewer, and buried oil tanks into scope in a way that dense urban property does not.
Buyers of multi-family and mixed-use buildings, investors evaluating a property before contract, and owners scoping capital planning. The common thread is a decision where the cost of being wrong is measured in tens of thousands of dollars.
Scope is agreed before the inspection based on property type, size and what the decision requires. The written report follows within 24 hours and documents conditions observed, with photographs, organized so it can be handed to an attorney, lender or contractor.
Three steps, with the scope set before anyone arrives on site.
Call or send the address and tell us the decision the inspection supports: a purchase, a sale, a refinance or capital planning. Scope is set from that. If the seller can share them, useful documents include the certificate of occupancy, recent boiler and elevator inspection records, the roof age and any recent capital work.
The walk covers the building systems and envelope described above: mechanical and boiler rooms, electrical service, cellar or basement, roof and drainage, visible facade, common areas and accessible tenant spaces. Access to units and tenant spaces is arranged in advance, and anything that could not be reached is recorded in the report.
The written report documents what was observed, with photographs, and separates safety concerns and near-term repairs from routine maintenance, so it can go straight to your attorney, lender or contractor.
An inspection documents visible conditions on the day of the visit. On a commercial purchase it sits next to other work, and the report tells you when something calls for a specialist.
Brought in when the inspection finds signs of movement, cracking or failure that need analysis beyond a visual assessment.
Asbestos, lead paint and underground oil tanks are tested by specialists, and older NYC buildings commonly raise these questions.
Your attorney or expeditor can review the certificate of occupancy, open violations and permits through NYC records. For buildings taller than six stories, ask the seller for the most recent facade inspection filing, along with boiler and elevator inspection filings.
Leases, rent rolls and operating statements go to your attorney and accountant. The inspection supplies the capital-expense picture those numbers depend on.
Yes. Mixed-use properties with ground-floor retail and residential units above are a common inspection type in NYC.
Scope is set before the inspection based on the property type, size, and what the buyer or owner needs the report to support.
Yes. Commercial and mixed-use inspections cover all five boroughs, plus Westchester and Long Island. Brooklyn, Queens and the Bronx mixed-use property is among the most common work.
Multi-family above the small two- to four-unit range, mixed-use buildings with retail or office at ground level, standalone retail, and light industrial or flex space. If you are unsure which category a property falls into, call with the address and the decision you are making and scope gets set from there.
A commercial inspection documents visible conditions and the remaining service life of major systems. A structural engineer's study goes further into design and structural capacity. When an inspection finds signs of movement or a failure that needs analysis, the report recommends the right specialist.
The property address, the property type, the decision the report supports (purchase, sale, refinance or capital planning), and a contact who can arrange access to units and mechanical spaces. If the seller can provide the certificate of occupancy, boiler and elevator inspection records and roof age, send those too.